White Papers

MCAST 3 0
MCAST 4 0
MCAST 5 0
MCAST 6 0
MCAST 7 0
MCAST 8 0
Example
displaying
ingress priority-
group level
snapshot for the
specific interface
DellEMC# show hardware buffer-stats-snapshot resource interface
fortyGigE 0/0 priority-group 7
Unit 0 unit: 0 port: 1 (interface Fo 0/0)
---------------------------------------
PG# SHARED CELLS HEADROOM CELLS
---------------------------------------
7 0 0
DellEMC# show hardware buffer-stats-snapshot resource interface
fortyGigE 0/0 priority-group all
Unit 0 unit: 0 port: 1 (interface Fo 0/0)
---------------------------------------
PG# SHARED CELLS HEADROOM CELLS
---------------------------------------
0 0 0
1 0 0
2 0 0
3 0 0
4 0 0
5 0 0
6 0 0
7 0 0
show hardware ipv6
Display information about IPv6 ACLs used on a Z9500 line card and port pipe.
Syntax
show hardware ipv6 {eg-acl | in-acl} linecard slot-id port-set port-pipe
Parameters
eg-acl | in-acl Enter either the keyword eg-acl or the keyword in-acl to display ingress or
egress ACL data.
linecard slot-id Enter the linecard slot-id parameters to specify a Z9500 line card. The
range of slot IDs is from 0 to 2.
port-set port-
pipe
Enter the keywords port-set port-pipe parameters to specify a port pipe
(set of ports) on a line card. The range of port-pipe numbers is: 0 to 2 on line card
0 and 0 to 3 on line cards 1 and 2.
Defaults none
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.2(1.0) Introduced on the Z9500.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
562 Debugging and Diagnostics