White Papers

rp Enter the keyword rp to display control-traffic information from the Route
Processor CPU.
linecard slot-id Enter the linecard slot-id parameters to display control-traffic information
from the specified line-card processor. The range of Z9500 slot IDs is from 0 to 2.
Defaults None.
Command Modes EXEC Privilege
Example
Dell# show control-traffic counters
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.2(1.0) Introduced on the Z9500.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.1.1.0 Introduced on the ES-Series.
show hardware
Display input and output traffic statistics and other operational information about a specified hardware component.
Syntax
show hardware {cp {cpu {data-plane | i2c | management| sata-interface}
statistics} |
cp-switch {counters | details | drops | port-stats |register | table-dump} |
linecard slot-id {buffer {total-buffer | unit unit-num [port port-num
[queue queue-num]]} |
cpu {data-plane | i2c | management | sata-interface} statistics |
drops {unit unit-num {port {port-num | port-range}} |
user-port {user-port-num | port-range}} |
unit unit-num {counters | details | ipmc-replication | port-stats |
register | table-dump} |
bp-link-map | bp-link-state | higig unit unit-num [port port-num]}
party-bus {port port-num statistics | all}
rp {cpu {data-plane | i2c | management | sata-interface} statistics} |
sfm sfm-unit-num {buffer {total-buffer | unit unit-num {port | total-
buffer}} | counters | details| drops | port-stats | register | table-dump}}
Parameters
cp Enter the keywords cp with a command option to display hardware statistics from
the Control Processor. The command options are:
● cpu data-plane statistics: Displays data-plane statistics, including the
HiGig port statistics with input/output counters to which the stacking module is
connected.
● cpu i2c statistics : Displays active i2c-address statistics.
● cpu management statistics: Displays management port counters.
● cpu sata-interface statistics: Displays sata-interface error counter
statistics.
cp-switch Enter the keyword cp-switch with a command option to display hardware
statistics for control-plane and protocol control traffic. The command options are:
Debugging and Diagnostics 545