White Papers

dot1p Value in
the Incoming
Frame
Description heading
4 2
5 3
6 3
7 3
show dcb
Displays the data center bridging status, the number of PFC-enabled ports, and the number of PFC-enabled queues.
Syntax
Show dcb linecard <0-2> port-set <0-3>
Parameters
unit number Enter the linecard number. The range is from 0 to 2.
port-set number Enter the port-set number. The range is from 0 to 3.
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the Z9500
Usage
Information
Specify a linecard number on the Master switch in a stack.
NOTE: show dcb command without options displays DCB buffer details for all linecards, SFMs, and
for all port-pipes.
Example
Dell#sh dcb linecard 2 port-set 0
DCB Status: Enabled, PFC Queue Count: 2
linecard Total Buffer PFC Total Buffer PFC Shared Buffer PFC Available Buffer
PP (KB) (KB) (KB) (KB)
-----------------------------------------------------------------------------
2 0 11210 7488 496 4992
Dell#
show interface pfc
Displays the PFC configuration applied to ingress traffic on an interface, including priorities and link delay.
Syntax
show interface port-type slot/port pfc {summary | detail}
Parameters
port-type slot/
port pfc
Enter the port-type slot and port PFC information.
{summary |
detail}
Enter the keyword summary for a summary list of results or enter the keyword
detail for a full list of results.
Command Modes INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
502 Data Center Bridging (DCB)