White Papers

Defaults Not configured.
Command Modes EXEC Privilege
Usage
Information
The show output displays information on CPU traffic flows for all protocols, including the ingress queue
at which the traffic is queued and the CPU to which protocol traffic is sent with the applied rate limits
(configured or default) in kilobits per second (kbps). The egress port queues on CPUs are abbreviated as:
RP (Route Processor), CP (Control Processor), and LC (line card).
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.8.0 Introduced on the S4810.
Example
Dell# show protocol-queue-mapping
Protocol Queue EgPort Commit Peak
Commit Peak Rate
Rate Burst Burst
(kbps) (kbps)
(kb) (kb)
-------- ----- ------ ------ ------
------ ----
STP Q15 RP 150 150
1000 1000
LLDP Q7 CP 500 500
1000 1000
PVST Q14 RP 200 200
1000 1000
LACP Q15 RP 500 500
1000 1000
ARP Q2/Q10/Q3/Q11 CP/RP 600 600
1000 1000
GVRP Q14 RP 200 200
1000 1000
FRRP Q22 LP 300 300
1000 1000
ECFM Q15 RP 150 150
1000 1000
ISIS Q15 RP 500 500
3000 3000
L2PT Q15 RP 150 150
1000 1000
v6 BGP Q15 RP 2500 2500
2000 2000
v6 OSPF Q15 RP 2500 2500
2000 2000
v6 VRRP Q15 RP 400 400
2000 2000
MLD Q14 RP 150 150 500
500
v6 ICMP NA Q3/Q11 CP/RP 600 600
1000 1000
v6 ICMP RA Q3/Q11 CP/RP 600 600
1000 1000
v6 ICMP NS Q2/Q10 CP/RP 600 600
1000 1000
v6 ICMP RS Q2/Q10 CP/RP 600 600
1000 1000
v6 ICMP Q5 CP 300 300
2000 2000
BGP Q15 RP 2500 2500
496
Control Plane Policing (CoPP)