White Papers

The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.8.0 Introduced on the S4810.
Usage
Information
In the show output, Rx Bytes displays the number of bytes of control-plane traffic received, on which
queue-based rate limiting is applied. Tx Counters displays the number of bytes transmitted to a control-
plane CPU after queue-based rate limiting is applied. Drop Counters displays the number of bytes of
control-plane traffic that have been dropped as a result of queue-based rate limiting.
To clear the per-queue counters of rate-limited control-plane traffic at the aggregated (switch) or line
card and port set level, use the clear control-traffic queue command.
Example
Dell#show control-traffic queue queue-id 0 counters
Queue Rx Counter Tx Counter Drop counter
---------------------------------------------------------
Q0 5000 5000 0
Dell#
show cpu-queue rate cp
Display the rates for each CPU queue.
Syntax
show cpu-queue rate cp
Defaults Not configured.
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.8.0 Introduced on the S4810.
492 Control Plane Policing (CoPP)