White Papers

802.1x 0 0 0
FEFD 0 0 0
FRRP 0 0 0
ECFM 0 0 0
L2PT 0 0 0
ISIS 0 0 0
BFD 0 0 0
BGP 0 0 0
v6 BGP 0 0 0
OSPF 0 0 0
v6 OSPF 0 0 0
RIP 0 0 0
VRRP 0 0 0
v6 VRRP 0 0 0
IGMP 0 0 0
PIM 0 0 0
NTP 0 0 0
MULTICAST CATCH ALL 0 0 0
v6 MULTICAST CATCH ALL 0 0 0
DHCP RELAY/DHCP 0 0 0
v6 ICMP NA/v6 ICMP RA 0 0 0
v6 ICMP NS/v6 ICMP RS 0 0 0
v6 ICMP/ICMP 0 0 0
MLD 0 0 0
MSDP 0 0 0
FTP/TELNET/SSH/
L3 LOCAL TERMINATED 0 0 0
L3 UNKNOWN/UNRESOLVED ARP 0 0 0
iSCSI 0 0 0
FCoE 0 0 0
SFLOW 0 0 0
VLT CTRL/VLT IPM PDU 0 0 0
HYPERPULL 0 0 0
OPENFLOW 0 0 0
L2 DST HIT/BROADCAST 0 0 0
VLT TTL1/TRACEFLOW/TTL0/
STATION MOVE/TTL1/IP OPTION/
L3 MTU FAIL/SOURCE MISS 0 0 0
show control-traffic queue
Display per-queue counters of rate-limited control-plane traffic.
Z9500
Syntax
show contol—traffic queue {all | queue-id queue-number} counters
Parameters
all Enter the keyword all to display counters for rate-limited traffic on all CPU
queues, including Route Processor, Control Processor, and line-card CPUs.
queue-id queue-
number
Enter the queue number to display counters for rate-limited traffic on a specified
CPU queue. The range of queue-number values is from 0 to 23. The twenty-
four control–plane queues are divided into groups of eight queues for the Route
Processor, Control Processor, and line-card CPUs as follows:
● Queues 0 to 7 process packets destined to the Control Processor CPU .
● Queues 8 to 15 process packets destined to the Route Processor CPU.
● Queues 16 to 23 process packets destined to the line card CPU.
Defaults None
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
Control Plane Policing (CoPP) 491