White Papers

Ipv4pbr number Enter the keyword ipv4pbr and then the number of FP blocks for ipv4pbr ACL.
The range is from 0 to 8.
Openflow number Enter the keyword openflow and then the number of FP blocks for open flow
(multiples of 4). The range is from 0 to 8.
fcoeacl number Enter the keyword fcoeacl and then the number of FP blocks for FCOE ACL. The
range is from 0 to 6.
Iscsioptacl
number
Enter the keyword iscsioptacl and then the number of FP blocks for iSCSI
optimization ACL. The range is from 0 to 2.
l2acl number
ipv4acl number
ipv6acl number ,
ipv4qos number
l2qos number l2pt
number ipmacacl
number
ecfmacl number
{nlbclusteracl]
[vman-qos |
vman-dual-qos
number ] ipv4pbr
number openflow
{4|8} |
fcoe number
[iscsioptacl
number ]
[vrfv4acl
number ]
Allocate space to each CAM region.
Enter 4 or 8 for the number of OpenFlow FP blocks.
● 4: Creates 242 entries for use by the OpenFlow controller (256 total entries
minus the 14 entries reserved for internal functionality)
● 8: Creates 498 entries for use by the OpenFlow controller (512 total entries
minus the 14 entries reserved for internal functionality)
The fcoe range is 0–6 groups. Each group has 128 entries; the value given must
be an even number. This information is stored in the NVRAM and is effective after
rebooting the switch.
ipv4udfmirracl
Enter the keyword ipv4udfmirracl and then the number of FP blocks for IPv4
UDF mirror ACL. The range is from 0 to 8.
[ipv4mirracl
Enter the ipv4mirracl keyword and then the number of FP blocks for IPv4
mirror ACL. The range is from 0 to 8. You cannot use the ipv4mirracl and
ipv4udfmirracl commands at the same time.
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.12(0.0) Added the keyword ipv4mirracl.
9.11(0.0) Added the keyword ipv4udfmirracl.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Added the nlbcluster ACL keyword. Introduced on the S6000-ON.
9.4.(0.0) Added support for PBR and VRF.
9.2(1.0) Introduced on the Z9500.
476 Content Addressable Memory (CAM)