White Papers

Version 7.4.1.0 Introduced
Usage
Information
If you enter clear ip bgp flap-statistics without any parameters, all statistics are cleared.
Related
Commands
show ip bgp ipv6 unicast flap-statistics – views BGP flap statistics.
clear ip bgp ipv6 unicast
Reset MBGP sessions.
E-Series
Syntax
clear ip bgp ipv6 unicast * ipv6-address prefix-length [dampening | flap-
statistics] peer-group]
Parameters
* Enter the character * to clear all peers.
ipv6-address
prefix-length
Enter the IPv6 address in the x:x:x:x::x format followed by the prefix length in
the /x format. The range is /0 to /128.
NOTE: The :: notation specifies successive hexadecimal fields of zeros.
dampening (OPTIONAL) Enter the keyword dampening to clear route flap dampening
information.
flap-statistics (OPTIONAL) Enter the keywords flap-statistics to reset the flap statistics
on all prefixes from that neighbor.
peer-group (OPTIONAL) Enter the keywords peer-group to clear all members of a peer-
group.
Command Modes EXEC Privilege
Command
History
Version 7.4.1.0 Introduced
clear ip bgp ipv6 unicast dampening
Clear information on route dampening.
E-Series
Syntax
clear ip bgp dampening ipv6 unicast [network network-mask]
Parameters
network (OPTIONAL) Enter the IPv6 network address in x:x:x:x::x format.
network-mask If you enter the network address, then enter the network mask, from 0 to 128.
Command Modes EXEC Privilege
Command
History
Version 7.4.1.0 Introduced
438 Border Gateway Protocol