White Papers

● For a Port Channel interface, enter the keywords port-channel, and then a
number.
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port information.
Defaults Not configured.
Command Modes CONF-IF-VLAN
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.11.1 Introduced on the Z9000.
8.2.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the C-Series and S-Series.
Usage
Information
Enable the stackable VLAN (using the vlan-stack compatible command) on the VLAN prior to
adding a member to the VLAN.
Related
Commands
● vlan-stack compatible — enables stackable VLAN on a VLAN.
peer-domain-link port-channel exclude-vlan
Configure the VLT port channel, which is connected to the remote VLT domain, for the proxy gateway or configure the VLANs
you want to exclude from VLT proxy gateway.
Z9500
Syntax
[no] peer-domain-link port-channel interface-identifier exclude-vlan vlan-
range
Parameters
port-channel Configure the proxy-gateway interface port-channel.
interface-
identifier
Enter the interface type.
vlan-range
Enter the VLAN IDs that you want to exclude from the proxy gateway. The value
can be a single VLAN ID, comma-separated VLAN IDs, a range of VLAN IDs, or a
combination. For example:
VLAN Stacking 1635