White Papers

Version Description
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
upload trace-log
Upload a trace log file from a Z9500 CPU.
Syntax
upload trace-log {rp | linecard slot-id} {cmd-history | hw-trace | sw-
trace}
Parameters
rp Enter the keyword rp to upload a trace log from the Route Processor CPU.
linecard slot-id Enter the linecard slot-id parameters to specify the line-card CPU whose
trace log you want to upload.
cmd-history Enter the keyword cmd-history to upload the command history from the
specified CPU.
hw-trace Enter the keyword hw-trace to upload the hardware trace log from the specified
CPU.
sw-trace Enter the keyword sw-trace to upload the software trace log from the specified
CPU.
Defaults None.
Command Modes CONFIGURATION
Command
History
Version Description
9.2(1.0) Introduced on the Z9500.
8.1.1.0 Introduced on the E-Series ExaScale.
7.5.1.0 Introduced on the C-Series.
Usage
Information
Trace log information is uploaded to flash:/TRACE_LOG_DIR.
Control and Monitoring 157