White Papers

show logging kernellog
Display the kernel log for the specified hardware component.
Syntax
show logging kernellog {cp | rp | linecard slot-id}
Parameters
cp Enter the keyword cp to display the kernel log for the Control Processor on the
switch.
rp Enter the keyword cp to display the kernel log for the Route Processor on the
switch.
linecard slot-id Enter the linecard slot-id parameters to specify the line-card ports for
which you want to display the kernel log. The range of line-card slot IDs is from 0
to 2.
defaults none
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
Examples
Dell# show logging kernellog cp
00:00:02:326592:AHCI_P_SCTL(0x01ac) 0x00000300
00:00:02:326599:AHCI_P_SERR(0x01b0) 0x00000000
00:00:02:326605:AHCI_P_SACT(0x01b4) 0x00000000
00:00:02:655656:pca9555x3:pca9555_write: iic_smbus_write_byte failed
addr=0x20 cmd_reg=0x8 rv=5
00:00:02:656982:pca9555x3:pca9555_write: iic_smbus_write_byte failed
addr=0x20 cmd_reg=0x9 rv=5
00:00:02:659597:pca9555x3:pca9555_write: iic_smbus_write_byte failed
addr=0x20 cmd_reg=0xf rv=5
00:00:43:418634:PCI unit 0: Dev 0xb852, Rev 0x03, Chip BCM56852_A2,
Driver BCM56850_A0
00:00:43:418655:PCI unit 1: Dev 0xb852, Rev 0x03, Chip BCM56852_A2,
Driver BCM56850_A0
00:00:43:418671:PCI unit 2: Dev 0xb852, Rev 0x03, Chip BCM56852_A2,
Driver BCM56850_A0
00:00:43:418687:PCI unit 3: Dev 0xb852, Rev 0x03, Chip BCM56852_A2,
Driver BCM56850_A0
00:00:43:418702:PCI unit 4: Dev 0xb852, Rev 0x03, Chip BCM56852_A2,
Driver BCM56850_A0
00:00:43:418718:PCI unit 5: Dev 0xb852, Rev 0x03, Chip BCM56852_A2,
Driver BCM56850_A0
00:00:43:418732:PCI unit 6: Dev 0xb636, Rev 0x11, Chip BCM56636_B0,
Driver BCM56634_B0
Dell#show logging kernellog rp
00:00:01:918834:ahcisata0 port 0: device present, speed: 6.0Gb/s
00:00:02:919154:ahcisata0 port 1: device not present
00:00:02:919164:
AHCI Global register dump
Simple Network Management Protocol (SNMP) and Syslog
1533