White Papers

3/10 2/18 10 up up
3/11 2/19 10 up up
3/12 4/4 10 up up
3/13 4/5 10 up up
3/14 4/6 10 up up
3/15 4/7 10 up up
3/16 4/8 10 up up
3/17 4/9 10 up up
3/18 4/10 10 up up
3/19 4/11 10 up up
4/4 3/12 10 up up
4/5 3/13 10 up up
4/6 3/14 10 up up
4/7 3/15 10 up up
4/8 3/16 10 up up
4/9 3/17 10 up up
4/10 3/18 10 up up
4/11 3/19 10 up up
The following example shows the show system stack-ports topology command.
Example: show system stack-ports topology
Dell#show system stack-ports
Topology: Ring
Interface Connection Trunk
Group
-----------------------------
0/4 1/4
0/5 1/5
0/6 1/6
0/7 1/7
0/8 4/12
0/9 4/13
0/10 4/14
0/11 4/15
1/4 0/4
1/5 0/5
1/6 0/6
1/7 0/7
1/8 2/4
1/9 2/5
1/10 2/6
1/11 2/7
1/12 2/8
1/13 2/9
1/14 2/10
1/15 2/11
2/4 1/8
2/5 1/9
2/6 1/10
2/7 1/11
2/8 1/12
Troubleshooting a Switch Stack
To perform troubleshooting operations on a switch stack, use the following commands on the master switch.
Command
Output
show system
stack-ports
status
Displays the status of stacked ports on stack units.
show
redundancy
Displays the standby unit status, failover configuration, and result of the last master-standby
synchronization; allows you to verify the readiness for a stack failover.
show hardware
stack-unit
Displays input and output flow statistics on a stacked port.
Stacking 849