White Papers

4. Configure the principal switch priority.
principal-priority<Principal Switch Priority>
For example: Dell(conf-fmap-default_full_fabric-fcfabric)# principal-priority 254
5. Configure the error detect timeout value.
E-D-TOV<FC E-D-TOV Timeout-Valued>
For example: Dell(conf-fmap-default_full_fabric-fcfabric)# e-d-TOV 2000
This is the basic error timeout used for all Fibre Channel error detection.
The default is 2000 milliseconds.
6. Configure the resource allocation timeout value.
R-A-TOV<FC R-A-TOV Timeout-value>
For example: Dell(conf-fmap-default_full_fabric-fcfabric)# r-a-TOV 10000
This is the amount of time given to devices to allocate the resources that process received frames.
The default is 10000 milliseconds.
7. Configure the receiver transmitter timeout value.
R-T-TOV<FC R-T-TOX Timeout-value>
For example: Dell(conf-fmap-default_full_fabric-fcfabric)# r-t-TOV 100
This is the amount of time that the receiver logic uses to determine loss of sync on the wire.
The default is 100 milliseconds.
Sample Configuration
Dell#configure terminal
Dell(conf)#fcoe-map default_full_fabric
Dell(conf-fcoe-default_full_fabric)#fc-fabric
Dell(conf-fmap-default_full_fabric-fcfabric)#domain-id-lock
Displaying the Fabric Parameters
To display information on switch-wide and interface-specific fabric parameters, use the show commands in the following table.
Examples of these show commands follow this table.
Command
Description
show config Displays the fabric parameters.
show fcoe-map Displays the fcoe-map.
show fc fabric Displays the information on all switches in the fabric.
show fc lsdb Displays the link state database information.
show fc ns
switch
Display all the devices in name server database of the switch.
show fc ns
switch brief
Display all the devices in name server database of the switch - brief version.
show fc ns fabric Display all the devices in name server database of the fabric.
show fc ns fabric
brief
Display all the devices in name server database of the fabric - brief version.
show fc route Displays the route table.
show fc zoneset Displays the zoneset.
show fc zoneset
active
Displays the active zoneset.
show fc zoneset
merged
Displays the merged active zones.
show fc zone Displays the configured zone.
Fabric Services 291