White Papers

Speed in RPM
-- Power Supplies --
Unit Bay Status Type FanStatus FanSpeed(rpm) Power AvgPower AvgPowerStartTime
--------------------------------------------------------------------------------------
1 1 up AC up 6960 48 31 14/4/2017 17:24
1 2 up AC up 6656 40 26 14/4/2017 17:24
-- Unit Environment Status --
Unit Status Temp Voltage
----------------------------------
* 1 online 50C ok
* Management Unit
-- Thermal Sensor Readings (deg C) --
Unit Bcm_Int CpuOnBoard Bcm56960 SysInt0 SysInt1 Cpu_Int
--------------------------------------------------------------
1 48 40 50 19 19 33
DellEMC#show environment fan
-- Fan Status --
Unit Bay TrayStatus Fan0 Speed Fan1 Speed
----------------------------------------------------
1 1 up up 6652 up 6797
1 2 up up 6568 up 6887
1 3 up up 6610 up 6979
1 4 up up 6680 up 6917
1 5 up up 6680 up 6812
Speed in RPM
DellEMC#show environment pem
-- Power Supplies --
Unit Bay Status Type FanStatus FanSpeed(rpm) Power AvgPower AvgPowerStartTime
--------------------------------------------------------------------------------------
1 1 up AC up 6960 48 31 14/4/2017 17:24
1 2 up AC up 6656 40 26 14/4/2017 17:24
DellEMC#show environment thermal-sensor
-- Thermal Sensor Readings (deg C) --
Unit Bcm_Int CpuOnBoard Bcm56960 SysInt0 SysInt1 Cpu_Int
--------------------------------------------------------------
1 48 40 50 19 19 32
DellEMC#
show inventory
Display the switch type, components (including media), and Dell EMC Networking Operating System (OS), including hardware
identification numbers and configured protocols.
Syntax
show inventory [media slot]
Parameters
media slot (OPTIONAL) Enter the keyword media then the stack ID of the stack member for
which you want to display pluggable media inventory.
NOTE: This parameter is available but not supported in Dell EMC Networking
Operating System version 8.3.11.4. Because stacking is not supported, if you
use this parameter, the output displays “Media not present or accessible”
(refer to the Usage Information section).
Defaults none
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
128 Control and Monitoring