Release Notes
Table Of Contents
- Dell Networking C9010, C1048P, N20xx, and N30xx 9.14(2.9P1) Release Notes
- Document Revision History
- C9010 Hardware
- C1048P Hardware
- N20xx Hardware
- N30xx Hardware
- New in This Release
- Known Behavior
- Changes to Default Behavior and CLI Syntax
- Restrictions
- Deferred Issues
- Fixed Issues
- Known Issues
- Documentation Errata
- Installation Instructions
- Update Instructions
- Support Resources
in flash by default
DellEMC#
7. Reload the system so that the Dell EMC Networking OS image is retrieved from flash.
EXEC Privilege mode
reload
DellEMC# write memory
!
00:11:17: %SYSTEM:CP %FILEMGR-5-FILESAVED: Copied running-config to startup-config
in flash by default
DellEMC#
DellEMC# reload
Proceed with reload [confirm yes/no]: y
rebooting...
After the C9010 reloads, the switch automatically upgrades all attached port extenders.
Dec 15 15:25:09: %RPM0-P:CP %IFMGR-5-OSTATE_UP: Changed interface state to up: Te 1/0
Dec 15 15:25:09: %RPM0-P:CP %BRM-5-PE_DISCOVERED: PE:f8:b1:56:00:01:44 is detected on
cascade port:TenGigabitEthernet 1/0.
Dec 15 15:25:09: %RPM0-P:CP %IFMGR-5-OSTATE_UP: Changed interface state to up: Po 258
Dec 15 15:25:11: %RPM0-P:CP %IFMGR-5-OSTATE_UP: Changed interface state to up: Te 1/1
Dec 15 15:25:11: %RPM0-P:CP %DOWNLOAD-6-VERSION_MISMATCH_INFO: Received checkin from
PE 0. Expected version = 9-14(2-9) checkin version = 9-14(2-8)
Dec 15 15:25:12: %RPM0-P:CP %DOWNLOAD-6-UPGRADE_PROGRESS: PE 0 firmware auto sync is
in progress.
Dec 15 15:25:13: %RPM0-P:CP %BRM-5-PE_UNIT_DOWN: PE:0 Unit:0 Unit
MAC:ab:cd:ef:00:01:02 is operationally down.
Dec 15 15:25:14: %RPM0-P:CP %BRM-5-BRM_LOG_PE_UNIT_VALIDATE_ERROR: PE:0 Unit:0 is in
error: SW version incompatible state.
Dec 15 15:25:15: %RPM0-P:CP %BRM-5-PE_DISCOVERED: PE:f8:b1:56:00:01:78 is detected on
cascade port:TenGigabitEthernet 1/1.
Dec 15 15:25:15: %RPM0-P:CP %IFMGR-5-OSTATE_UP: Changed interface state to up: Po 259
Dec 15 15:25:17: %RPM0-P:CP %DOWNLOAD-6-VERSION_MISMATCH_INFO: Received checkin from
PE 1. Expected version = 9-14(2-9) checkin version = 9-14(2-8)
Dec 15 15:25:17: %RPM0-P:CP %DOWNLOAD-6-UPGRADE_PROGRESS: PE 1 firmware auto sync is
in progress.
Dec 15 15:25:19: %RPM0-P:CP %BRM-5-PE_UNIT_DOWN: PE:1 Unit:1 Unit
MAC:ab:cb:ef:00:01:03 is operationally down.
Dec 15 15:25:19: %RPM0-P:CP %BRM-5-BRM_LOG_PE_UNIT_VALIDATE_ERROR: PE:1 Unit:1 is in
error: SW version incompatible state.
Dec 15 15:30:03: %RPM0-P:CP %DOWNLOAD-6-UPGRADE: PE 0 auto upgrade result - upgrade
success, initiating reset.
Dec 15 15:30:05: %RPM0-P:CP %IFMGR-5-OSTATE_DN: Changed interface state to down: Te
1/0
Dec 15 15:30:05: %RPM0-P:CP %IFMGR-5-OSTATE_DN: Changed interface state to down: Po
258
Dec 15 15:30:09: %RPM0-P:CP %DOWNLOAD-6-UPGRADE: PE 1 auto upgrade result - upgrade
success, initiating reset.
Dec 15 15:30:12: %RPM0-P:CP %IFMGR-5-OSTATE_DN: Changed interface state to down: Te
1/1
Dec 15 15:30:12: %RPM0-P:CP %IFMGR-5-OSTATE_DN: Changed interface state to down: Po
259
8. Verify that the system is upgraded to the latest Dell EMC Networking OS version.
EXEC Privilege mode
show chassis brief
show pe {0–255} system brief
12