Administrator Guide

Table Of Contents
Simple Network Management Protocol
(SNMP)
Simple network management protocol (SNMP) is supported on Dell Networking OS.
NOTE: On Dell Networking routers, standard and private SNMP management information bases (MIBs) are supported,
including all Get and a limited number of Set operations (such as set vlan and copy cmd).
Topics:
Protocol Overview
Implementation Information
SNMPv3 Compliance With FIPS
Configuration Task List for SNMP
Important Points to Remember
Set up SNMP
Reading Managed Object Values
Writing Managed Object Values
Configuring Contact and Location Information using SNMP
Subscribing to Managed Object Value Updates using SNMP
Enabling a Subset of SNMP Traps
Copy Configuration Files Using SNMP
MIB Support to Display the Available Memory Size on Flash
MIB Support to Display the Software Core Files Generated by the System
Manage VLANs using SNMP
Managing Overload on Startup
Enabling and Disabling a Port using SNMP
Fetch Dynamic MAC Entries using SNMP
Deriving Interface Indices
Monitor Port-Channels
Troubleshooting SNMP Operation
Protocol Overview
Network management stations use SNMP to retrieve or alter management data from network elements.
A datum of management information is called a managed object; the value of a managed object can be static or variable.
Network elements store managed objects in a database called a management information base (MIB).
MIBs are hierarchically structured and use object identifiers to address managed objects, but managed objects also have a
textual name called an object descriptor.
Implementation Information
The following describes SNMP implementation information.
Dell Networking OS supports SNMP version 1 as defined by RFC 1155, 1157, and 1212, SNMP version 2c as defined by RFC
1901, and SNMP version 3 as defined by RFC 2571.
Dell Networking OS supports up to 16 trap receivers.
Dell Networking OS implementation of the sFlow MIB supports sFlow configuration via SNMP sets.
46
Simple Network Management Protocol (SNMP) 653