Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsOS9

841

842

843

844

845

846

847

848

849

850

Table Of Contents

To return to the default bandwidth or to assign cost based on the interface type, use the no auto-

cost [reference-bandwidth] command.

Parameters

ref-bw

(OPTIONAL) Specify a reference bandwidth in megabits per second. The range is

from 1 to 4294967. The default is 100 megabits per second.

Defaults 100 megabits per second.

Command Modes ROUTER OSPF

Command

History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.8.1.0 Added support for the Multi-Process OSPF.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

pre- 6.1.1.1 Introduced on the E-Series.

clear ip ospf

Clear all OSPF routing tables.

Z9000

Syntax

clear ip ospf process-id [process]

Parameters

process-id

Enter the OSPF Process ID to clear a specific process. If no Process ID is entered,

all OSPF processes are cleared.

process (OPTIONAL) Enter the keyword process to reset the OSPF process.

Command Modes EXEC Privilege