Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsOS9

731

732

733

734

735

736

737

738

739

740

Table Of Contents

Command Modes

● EXEC

● EXEC Privilege

Command

History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

8.2.1.0 Introduced on the S-Series.

7.7.1.0 Introduced on the C-Series.

7.5.1.0 Introduced on the E-Series.

show cam mac linecard (count)

Display the content addressable memory (CAM) size and the portions allocated for MAC addresses and for MAC ACLs.

Syntax

show cam mac linecard slot port-set port-pipe count [vlan vlan-id]

[interface interface]

Parameters

linecard

slot

(REQUIRED) Enter the keyword linecard then a slot number to select the

linecard for which to gather information.

port-set

port-

pipe

(REQUIRED) Enter the keywords port-set then a Port-Pipe number to select

the Port-Pipe for which to gather information.

count (REQUIRED) Enter the keyword count to display CAM usage by interface type.

interface

(OPTIONAL) Enter the keyword interface then the interface type, slot and port

information:

● For a port channel interface, enter the keywords port-channel then a

number.

● For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port information.

● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the

slot/port information.

vlan

vlan-id

(OPTIONAL) Enter the keyword vlan then the VLAN ID to display the MAC

address assigned to the VLAN. The range is from 1 to 4094.