Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsOS9

Table Of Contents

scp: After entering the keyword scp:, you can either follow it with the location of the source file in this form: //

userid:password@hostip/filepath or press Enter to launch a prompt sequence.

slot0: After entering the keyword slot0:, you can either follow it with the location of the source file in this form: //

hostlocation/filepath or press Enter to launch a prompt sequence.

tftp: After entering the keyword tftp:, you can either follow it with the location of the source file in this form: //

hostlocation/filepath or press Enter to launch a prompt sequence.

flash: After entering the keyword flash:, you can either follow it with the location of the source file in this form: flash//

filepath or press Enter to launch a prompt sequence.

Enter the partition to upgrade from the flash.

stack-unit: Enter the keywords stack-unit: to synch the image to the stack-unit.

file-url

Enter the following location keywords and information to upgrade using an Dell Networking OS image other than the one

currently running:

● To specify an Dell Networking OS image on the internal flash, enter flash:// file-path/filename.

● To specify an Dell Networking OS image on an FTP server, enter ftp://user:password@hostip/filepath.

● To specify an Dell Networking OS image on the external flash on the primary RPM, enter slot0://file-path/

filename.

● To copy a file on a TFTP server, enter tftp://hostip/filepath/filename.

where hostip is either an IPv4 dotted decimal address or an IPv6 URI [x:x:x:x::x] format address.

Defaults none

Command Modes EXEC Privilege

Command

History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line

Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0(0.0) Added support for IPv6 for the file-url parameter.

Version 8.3.19.0 Introduced on the S4820T.

Version 8.3.11.1 Introduced on the Z9000. Added support for the SSD on the Z9000 only.

Version 8.3.7.0 Introduced on the S4810.

Version 7.7.1.0 Added support for TFTP and SCP.

Version 7.6.1.0 Introduced on the S-Series.

Usage

Information

RFC 3986 specifies that IPv6 host addresses in a uniform resource identifier (URI) must be enclosed in square brackets, [X:X:X:X::X]. For

maximum flexibility this command accepts IPv6 host addresses with or without the square brackets.

Reload Dell Networking OS after executing this command. To copy Dell Networking OS from the management unit to one or more stack

members, use the upgrade system stack-unit (S-Series stack member) command.

Example

Dell# upgrade system ?

ftp: Copy from remote file system (ftp://userid:password@hostip/filepath)

scp: Copy from remote file system (scp://userid:password@hostip/filepath)

tftp: Copy from remote file system (tftp://hostip/filepath)

Dell# upgrade system ftp://username:password@10.11.1.1/FTOS-SB-7.7.1.0.bin

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!

Erasing Sseries ImageUpgrade Table of Contents, please wait

.!..................................................................................................

....................................................................................................

File Management 73