Administrator Guide

Table Of Contents
Parameters
<10-299> Interface rate interval in seconds
Command Modes
CONFIGURATION
Command
History
Version 9.3(0.0) Introduced on the Z9000 platform.
Defaults The default hiGig stats polling interval is 15 seconds.
Usage
Information
This interval cannot be configured per high-Gigabit port channel and is applicable for all of the high-
Gigabit port channels on the system.
show hg-link-bundle-distribution
Display the traffic-handling and utilization of the member interfaces of the high-Gigabit port channel or trunk group. This
command is supported on the Z9000 platform.
Syntax
show hg-link-bundle-distribution slot slotId npuUnit npuUnitId hg-port-
channel portChannelId
Parameters
slot
slotId
Enter the keyword slot followed by the slot ID of the high-Gigabit port channel.
For Z9000, the only valid slot number is 0.
npuUnit
npuUnitId
Enter the keyword npuUnit followed by the NPU value. The range is from 0-5.
hg-port-channel
portChannelId
Enter the keyword hg-port-channel followed by the unique ID of the port
channel. Number of hg-port-channels vary for switch NPU and fabric NPUs.
Command Modes
EXEC, EXEC Privilege
Command
History
Version 9.3(0.0) Introduced on the Z9000 platform.
Usage
Information
The following table illustrates the fields displayed in the output of this command:
Field Description
Link-bundle trigger threshold Threshold value that is the checkpoint, exceeding
which the link bundle is marked as being over
utilized and alarm is generated
Slot Slot number where the high-Gigabit port-channel
resides
npuUnit Network Processign Unit (NPU) number where
the high-Gigabit port-channel resides
number Number of the LAG bundle
Utilization (In Percent) Traffic usage in percentage of the packets
processed by the port channel
Alarm State Indicates whether an alarm is generated if uneven
utilization of the port channel occurred. Possible
values are Active and Inactive
Interface Slot and port number, and the type of the
member interface of the port channel
Utilization (In Percent) Traffic usage in percentage of the packets
processed by the particular member interface
Link Aggregation Control Protocol (LACP) 723