Administrator Guide

redundancy disable-auto-reboot stack-unit
...
Related
Commands
show running-config – displays the current (running) configuration.
show version
Display the current Dell Networking Operating System (OS) version information on the system.
Syntax
show version
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Command Fields
Lines
Beginning
With
Description
Dell Network... Name of the operating system
Dell Operating... OS version number
Dell
Application...
Software version
Copyright (c)... Copyright information
Build Time... Software build’s date stamp
Build Path... Location of the software build files loaded on the system
Dell Networking
OS uptime is...
Amount of time the system has been up
System image... Image file name
System Type: S4810, S4820T, Z9000, S6000
Control
Processor:...
Control processor information and amount of memory on processor
128K bytes... Amount and type of memory on system
1 Route
Processor...
Hardware configuration of the system, including the number and type of physical
interfaces available
File Management 71