Administrator Guide

redistribute bgp
Redistribute routing information from a BGP process.
Syntax
redistribute bgp AS number [level-1| level-1-2 | level-2] [metric metric-
value] [metric-type {external| internal}] [route-map map-name]
To return to the default values, use the no redistribute bgp command with the appropriate
parameters.
Parameters
AS number Enter a number that corresponds to the autonomous system number. The range is
from 1 to 65355.
level-1 (OPTIONAL) Routes are independently redistributed into IS-IS Level 1 routes only.
level-1-2 (OPTIONAL) Routes are independently redistributed into IS-IS Level 1 and Level 2
routes.
level-2 (OPTIONAL) Routes are independently redistributed into IS-IS as Level 2 routes
only. This setting is the default.
metric metric-
value
(OPTIONAL) The value used for the redistributed route. Use a metric value that
is consistent with the destination protocol. The range is from 0 to 16777215. The
default is 0.
metric-type
{external|
internal}
(OPTIONAL) The external link type associated with the default route advertised
into a routing domain. The two options are:
● external
● internal
route-map map-
name
map-name is an identifier for a configured route map. The route map filters
imported routes from the source routing protocol to the current routing protocol.
If you do not specify a map-name, all routes are redistributed. If you specify a
keyword, but fail to list route map tags, no routes are imported.
Defaults IS-IS Level 2 routes only
Command Modes
● ROUTER ISIS (for IPv4)
● CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.12.0 Introduced on the S4810.
7.5.1.0 Added support for IPv6 ISIS.
6.3.1.0 Introduced.
Usage
Information
BGP to IS-IS redistribution supports “match” options using route maps. You can set the metric value,
level, and metric-type of redistributed routes by the redistribution command. You can “set” more
advanced options using route maps.
Example
FTOS(conf)#router is
FTOS(conf-router_isis)#redistribute bgp 1 level-1 metric 32 metric-type
external route-map rmap-isis-to-bgp
FTOS(conf-router_bgp)#show running-config isis
Intermediate System to Intermediate System (IS-IS) 701