Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsOS9

671

672

673

674

675

676

677

678

679

680

Table Of Contents

domain-password

Set the authentication password for a routing domain.

Syntax

domain-password [hmac-md5 | encryption-type] password

To disable the password, use the no domain-password command.

Parameters

hmac-md5 (OPTIONAL) Enter the keywords hmac-md5 to encrypt the password using MD5.

encryption-type

(OPTIONAL) Enter 7 to encrypt the password using DES.

password

Enter an alphanumeric string up to 16 characters long. If you do not specify an

encryption type or hmac-md5 keywords, the password is processed as plain

text which provides limited security.

Defaults No default password.

Command Modes ROUTER ISIS

Command

History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.12.0 Introduced on the S4810.

8.3.11.1 Introduced on the Z9000.

6.3.1.0 Introduced.

Usage

Information

The domain password is inserted in Level 2 link state PDUs (LSPs), complete sequence number PDUs

(CSNPs), and partial sequence number PDUs (PSNPs).

Commands

● area-password — configures an IS-IS area authentication password.

● isis priority — configures the authentication password for an interface.

graceful-restart ietf

Enable graceful restart on an IS-IS router.