Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsOS9

661

662

663

664

665

666

667

668

669

670

Table Of Contents

Usage

Information

CAUTION: Use caution when you enter this command. Back up your configuration prior to

using this command or your IS-IS configuration will be erased.

clear isis

Restart the IS-IS process. All IS-IS data is cleared.

Z9000

Syntax

clear isis [tag] {* | database | traffic}

Parameters

tag

(Optional) Enter an alphanumeric string to specify the IS-IS routing tag area.

* Enter the keyword * to clear all IS-IS information and restart the IS-IS process.

This command removes IS-IS neighbor information and IS-IS LSP database

information and the full SPF calculation is done.

database Clears IS-IS LSP database information.

traffic Clears IS-IS counters.

Command Modes EXEC Privilege

Command

History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.12.0 Introduced on the S4810.

8.3.11.1 Introduced on the Z9000.

clns host

Define a name-to-network service mapping point (NSAP) that you use with commands that require NSAPs and system IDs.

Syntax

clns host name nsap

Parameters

name

Enter an alphanumeric string to identify the name-to-NSAP mapping.

nsap

Enter a specific NSAP address that is associated with the name parameter.

Defaults Not configured.

Command Modes ROUTER ISIS