Administrator Guide

13 0 1312
12 0 1312
11 0 1312
10 0 1312
9 0 1312
8 0 1312
7 0 1312
6 0 1312
5 0 1312
4 0 1312
3 0 1312
2 0 1312
1 0 1312
0 0 8
Dell#
show ip cam stack-unit
Display CAM entries for a port-pipe of a stack-unit on a S-Series or Z-Series switch.
Syntax
show ip cam stack-unit {id} [port-set {pipe-number} {ip-address mask [longer-prefixes [ecmp-
group detail]]}| ecmp-group {detail | member-info [detail [group-index index-number]]}|
summary]
Parameters
id Enter the stack-unit ID. The unit ID range is from 0 to 7 for the Z9000.
port-set pipe-
number
Enter the keyword port-set then the number of the stack unit’s port-pipe. The unit ID range is from 0 to
3 for the Z9000.
network mask
[longer-prefixes
[ecmp-group
detail]]
(OPTIONAL) Enter the IP address and mask of a route to CAM entries for that route only. You can enter
one of the following keywords to filter results.
● Enter the keyword longer-prefixes to view routes with a common prefix.
● Enter the keyword ecmp-group detail to view the ECMP group index.
ecmp-group
{detail | member-
info [detail
[group-index
index-number ]]}
(OPTIONAL) Enter the keyword ecmp-group then one of the following keywords to filter results.
● Enter the keyword detail to view the ECMP group index.
● Enter the keyword member-info to view the member information for the ECMP group.
● Enter the keyword member-info detail to view detailed ECMP membership and n-hop information.
● Enter the keyword group-index then the index number to show ECMP membership per group. The
range is from 0 to 1022.
summary (OPTIONAL) Enter the keyword summary to view a table listing route prefixes and the total number routes
which can be entered in to CAM.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS
Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Added support for up to seven stack members.
7.6.1.0 Introduced on the S-Series.
IPv4 Routing 615