Administrator Guide

Version Description
8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
8.4.1.0 Added support for port-channel interfaces (the port-channel number option).
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.7.1.0 Added the backup interface option.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-Version
6.2.1.0
Introduced on the E-Series.
Usage
Information
If an IP address or VRRP group is assigned to the interface, you cannot use the switchport command
on the interface. To use the switchport command on an interface, only the no ip address and no
shutdown statements must be listed in the show config output.
When you enter the switchport command, the interface is automatically added to the default VLAN.
To use the switchport backup interface command on a port, first enter the switchport
command. For more information, refer to the “Configuring Redundant Links” section in the “Layer 2”
chapter of the Dell Networking OS Configuration Guide.
Related
Commands
interface port-channel — creates a port channel interface.
show interfaces switchport — displays information about switchport interfaces.
Egress Interface Selection (EIS) Commands
The following commands are Egress Interface Selection (EIS) commands.
application
Configure the management egress interface selection.
Z9000
Syntax
application {all | application-type}
To remove a management application configuration, use the no application {all |
application-type} command.
Parameters
application-type Enter any of the following keywords:
● For DNS, enter the keyword dns.
● For FTP, enter the keyword ftp.
● For NTP, enter the keyword ntp.
● For Radius, enter the keyword radius.
● For sFlow collectors, enter the keyword sflow-collector.
● For SNMP (traps and MIB responses), enter the keywords snmp .
● For SSH, enter the keyword ssh .
● For Syslog, enter the keyword syslog.
● For TACACS, enter the keyword tacacs.
● For Telnet, enter the keyword telnet.
● For TFTP, enter the keyword tftp.
548 Interfaces