Administrator Guide

detail (OPTIONAL) Enter the keyword detail to display detailed interface dampening
data.
Defaults none
Command Modes EXEC
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
7.4.1.0 Introduced
Example
Dell#show interfaces dampening
Interface Supp Flaps Penalty Half-Life Reuse Suppress Max-Sup
State
Te 3/2 Up 0 0 20 800 4500 120
Te 3/10 Up 0 0 5 750 2500 20
Dell#
Related
Commands
dampening — configures dampening on an interface.
show interfaces — displays information on a specific physical interface or virtual interface.
show interfaces configured — displays any interface with a non-default configuration.
show interfaces phy
Display auto-negotiation and link partner information.
Z9000
Syntax
show interfaces gigabitethernet slot/port phy
Parameters
tengigabitethern
et
Enter the keyword tengigabitethernet then the slot or port information.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Interfaces 531