Administrator Guide

ARP type: ARPA, ARP Timeout 04:00:00
Last clearing of "show interface" counters 00:06:14
Queueing strategy: fifo
Input 791 packets, 62913 bytes, 775 multicast
Received 0 errors, 0 discarded
Output 21 packets, 3300 bytes, 20 multicast
Output 0 errors, 0 invalid protocol
Time since last interface status change: 00:06:03
Example
(OpenFlow
instance)
Dell#show interfaces vlan 6
Vlan 6 is down, line protocol is down
Address is 00:01:e8:8a:e1:8c, Current address is 00:01:e8:8a:e1:8c
Interface index is 1107525638
of-instance: 2
Internet address is not set
MTU 1554 bytes, IP MTU 1500 bytes
LineSpeed auto
ARP type: ARPA, ARP Timeout 04:00:00
Last clearing of "show interface" counters 00:05:12
Queueing strategy: fifo
Time since last interface status change: 00:05:12
Related
Commands
show interfaces configured – displays any interface with a non-default configuration.
show interfaces switchport – displays Layer 2 information about the interfaces.
show inventory (S-Series and Z-Series) – displays the S-Series and Z-Series switch types, components
(including media), Dell Networking OS version including hardware identification numbers, and configured
protocols.
show range – displays all interfaces configured using the interface range command.
show interfaces configured
Display any interface with a non-default configuration.
Z9000
Syntax
show interfaces configured
Command Modes
● EXEC
● EXEC Privilege
Command
History
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Interfaces 529