Administrator Guide

Version Description
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the C-Series and S-Series.
netbios-node-type
Specify the NetBIOS node type for a Microsoft DHCP client. Dell Networking recommends specifying clients as hybrid.
Z9000
Syntax
netbios-node-type type
Parameters
type Enter the NETBIOS node type:
● Broadcast: Enter the keyword b-node.
● Hybrid: Enter the keyword h-node.
● Mixed: Enter the keyword m-node.
● Peer-to-peer: Enter the keyword p-node.
Defaults Hybrid
Command Modes DHCP <POOL>
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on the C-Series and S-Series.
network
Specify the range of addresses in an address pool.
Z9000
Syntax
network network /prefix-length
Parameters
network/ prefix-
length
Specify a range of addresses. Prefix-length range is from 17 to 31.
Defaults none
Command Modes DHCP <POOL>
412 Dynamic Host Configuration Protocol (DHCP)