Administrator Guide

party-bus statistics | stack-port | ti-monitor | unit 0-1 {counters |
details | port-stats [detail] | register}}
Parameters
stack-unit stack-
unit {command-
option}
Enter the keywords stack-unit to select a particular stack member and then
enter one of the following command options to display a collection of data based on
the option entered. The range is from 0 to 7.
buffer Enter the keyword buffer. To display the total buffer statistics for the stack unit,
enter the keyword total-buffer. To display the buffer statistics for a specific
unit, enter the keyword unit and a unit number from 0 to 5 .
To display the buffer statistics for a specific port, enter the keyword port and a
port number from 1 to 128 .
To display total buffer information for the port, enter the keywords buffer-
info. To display a queue range, enter 0 to 14 for a specfic queue or all.
cpu data-plane
statistics
(Optional) Enter the keywords cpu data-plane statistics then the
keywords stack port and its number, from 0 to 52 to display the data plane
statistics, which shows the High Gig (Higig) port raw input/output counter
statistics to which the stacking module is connected.
cpu i2c statistics Z9000 only: Enter the keywords cpu i2c statistics to display active i2c
address statistics.
cpu management
statistics
Enter the keywords cpu management statistics to display the counters of
the management port.
cpu sata-
interface
statistics
Enter the keywords cpu sata-interface statistics to display the sata
interface error counter statistics.
drops [unit unit-
number [port
port-number |
no]]
Enter the keyword drops to display internal drops on the selected stack member.
Enter the drops keyword to display internal drops on the selected stack member.
Option unit 0 followed by port 1-104 (in S6000) is based on internal/hardware port
number” and “option user-port 0-127 is to see the drop using user port numbering
convention.
fpga register Enter the keyword to display the register value of fpga resgister details in S4810,
Z9000 and S6000.
stack-port port-
number
Enter the keywords stack-port and a stacking port number to select a stacking
port for which to display statistics. The range is 0.
unit unit-number
{counters |
details | port-
stats [detail] |
register}
Enter the keyword unit then 0 to 5 and then enter one of the following keywords
to troubleshoot errors on the selected port-pipe and to give status on why a port is
not coming up to register level: counters, details, port-stats [detail],
or register.
TI monitor Enter the unit keyword to show information regarding the TI register.
Defaults none
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.2(0.2) Modified the drops keyword range, unit keyword range and added the buffer
and cpu management statistics options.
9.0.2.0 Introduced on the S6000.
Debugging and Diagnostics 397