Administrator Guide

Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
Usage
Information
The unit numbers given are internal port numbers. For a cross reference of the internal and user port
numbers, refer to the Z9000 Debugging and Diagnostics chapter in the Dell Networking OS Configuration
Guide for the Z9000 System.
show hardware layer3
Display Layer 3 ACL or QoS data for the selected stack member and stack member port-pipe.
Syntax
show hardware layer3 {acl | qos} stack-unit number port-set 0–0
Parameters
acl | qos Enter either the keyword acl or the keyword qos to select between ACL or QoS
data.
stack-unit
number
Enter the keywords stack-unit then a number to select a stack ID. The range is
from 0 to 7.
port-set 0–0 Enter the keyword port-set with a port-pipe number. The range is from 0 to 1.
Defaults none
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.0 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
show hardware stack-unit
Display the data plane or management plane input and output statistics of the designated component of the designated stack
member.
Syntax
stack-unit <id> {cpu data-plane statistics | cpu management statistics |
[ drops [unit number [port 1-104] | user-port 0-127] | fpga register |
396 Debugging and Diagnostics