Administrator Guide

prefix-list name Enter the name of the prefix list.
NOTE: There is a 140-character limit for prefix list names.
summary Display a summary of RPF routes.
Command Modes EXEC
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant
FTOS Command Line Reference Guide.
The following is a list of the FTOS version history for this command.
Version Description
9.0.0.0 Introduced on the Z9000.
8.3.10.0 Introduced on the S4810.
Related
Commands
ipv6 prefix-list — configures an IPv6 prefix-list.
IPv6 MBGP Commands
Multiprotocol BGP (MBGP) is an enhanced BGP that enables the multicast routing policy throughout the internet and
connecting multicast topologies between BGP and autonomous systems (AS). FTOS MBGP is implemented as per IETF RFC
1858.
show ipv6 mbgproutes
Display the selected IPv6 MBGP route or a summary of all MBGP routes in the table.
Z-Series
Syntax
show ipv6 mbgproutes ipv6-address prefix-length | summary
Parameters
ipv6-address
prefix-length
(OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format then the prefix length
in the /x format. The range is from /0 to /128.
NOTE: The :: notation specifies successive hexadecimal fields of zeros.
summary Display a summary of RPF routes.
Command Modes EXEC
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant
FTOS Command Line Reference Guide.
The following is a list of the FTOS version history for this command.
Version Description
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.10.0 Introduced on the S4810.
374 Border Gateway Protocol