Administrator Guide

*>n 33.33.33.33/32 0.0.0.0 0 32768 i
*>n 33.33.44.55/32 0.0.0.0 0 32768 i
*>n 44.44.44.44/32 0.0.0.0 0 32768 i
*>I 55.55.0.0/16 72.1.1.2 100 0 i
*>I 55.55.55.55/32 72.1.1.2 0 100 0 i
*>I 55.55.66.66/32 72.1.1.2 0 100 0 i
*>a 66.66.0.0/16 0.0.0.0 32768 i
*>n 66.66.66.77/32 0.0.0.0 0 32768 i
*>n 66.66.77.77/32 0.0.0.0 0 32768 i
show ip bgp neighbors
Allows you to view the information BGP neighbors exchange.
Z-Series
Syntax
show ip bgp [ipv4 {multicast | unicast} | ipv6 unicast] neighbors [ip-
address [advertised-routes | dampened-routes | detail | flap-statistics
| routes | {received-routes [network [network-mask]]} | {denied-routes
[network [network-mask]]}]
Parameters
ipv4 multicast (OPTIONAL) Enter the keyword ipv4 followed by the keyword multicast to
view information related only to ipv4 multicast routes.
ipv4 unicast (OPTIONAL) Enter the keyword ipv4 followed by the keyword unicast to view
information related only to ipv4 unicast routes.
ipv6 unicast (OPTIONAL) Enter the keyword ipv6 followed by the keyword unicast to view
information related only to ipv6 unicast routes.
ip-address (OPTIONAL) Enter the IP address of the neighbor to view only BGP information
exchanged with that neighbor.
advertised-
routes
(OPTIONAL) Enter the keywords advertised-routes to view only the routes
the neighbor sent.
dampened-routes (OPTIONAL) Enter the keywords dampened-routes to view information on
dampened routes from the BGP neighbor.
detail (OPTIONAL) Enter the keyword detail to view neighbor-specific internal
information for the IPv4 Unicast address family.
flap-statistics (OPTIONAL) Enter the keywords flap-statistics to view flap statistics on
the neighbor’s routes.
routes (OPTIONAL) Enter the keyword routes to view only the neighbor’s feasible
routes.
received-routes
[ network
[ network-mask ]
(OPTIONAL) Enter the keywords received-routes then either the network
address (in dotted decimal format) or the network mask (in slash prefix format) to
view all information received from neighbors.
NOTE: Configure the neighbor soft-reconfiguration inbound
command prior to viewing all the information received from the neighbors.
denied-routes
[ network
[ network-mask ]
(OPTIONAL) Enter the keywords denied-routes then either the network
address (in dotted decimal format) or the network mask (in slash prefix format)
to view all information on routes denied via neighbor inbound filters.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Border Gateway Protocol 347