Administrator Guide

Vlan Members Test - test
- 1-100
The following sample output shows the line-by-line style display when using the show acl-vlan-
group detail option.
NOTE: No group or access list names are truncated
Dell#show acl-vlan-group detail
Group Name :
Test
Egress IP Acl :
-
Ingress IP Acl :
test
Ingress IPV6 Acl :
-
Vlan Members :
1-100
show cam-acl-vlan
Display the number of flow processor (FP) blocks that is allocated for the different VLAN services.
Syntax
show cam-acl-vlan
Command Modes EXEC Privilege
Command
History
Version 9.3.(0.0) Introduced on the S4810, S4820T, Z9000 and MXL platforms.
Usage
Information
After CAM configuration for ACL VLAN groups is performed, you must reboot the system to enable the
settings to be stored in nonvolatile storage. During the initialization of CAM, the chassis manager reads
the NVRAM and allocates the dynamic VCAP regions.
The following table describes the output fields of this show command:
Field Description
Chassis Vlan Cam ACL Details about the CAM blocks allocated for ACLs
for various VLAN operations at a system-wide,
global level.
Stack Unit <number> Details about the CAM blocks allocated for ACLs
for various VLAN operations for a particular stack
unit.
Current Settings(in block sizes) Information about the number of FP blocks that
are currently in use or allocated.
VlanOpenFlow Number of FP blocks for VLAN open flow
operations.
VlanIscsi Number of FP blocks for VLAN internet small
computer system interface (iSCSI) counters.
VlanHp Number of FP blocks for VLAN high performance
processes.
VlanFcoe Number of FP blocks for VLAN Fiber Channel
over Ethernet (FCoE) operations.
VlanAclOpt Number of FP blocks for ACL VLAN optimzation
feature.
Access Control List (ACL) VLAN Groups and Content Addressable Memory (CAM) 251