Administrator Guide

Command
History
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Introduced on the S4810, S4820T, S6000, Z9000.
Usage
Information
When proxy-gateway static configuration is added, the setting is saved in the Layer 2 module. When
you remove the static proxy gateway configuration, each proxy-gateway static mac configured is
deleted from the Layer 2 module.
Example
Dell(conf)#vlt-domain 1
Dell(conf-vlt-domain#proxy-gateway static
remote-mac-address exclude-vlan
Configure the proxy-gateway static entry and exclude a VLAN or a range of VLANs from proxy routing.
Z9000
Syntax
[no] remote-mac-address mac—address [exclude-vlan vlan-range]
Parameters
remote-mac-
address
Specify the mac-addresses of the VLT peers which are in the remote VLT Domain.
mac-address Enter the 48-bit hexadecimal address in nn:nn:nn:nn:nn:nn format.
vlan-range
Enter the VLAN IDs in which proxy gateway is not needed. The VLANs are
excluded from doing proxy gateway. The value can be a single VLAN ID or comma
-separated, VLAN IDs or a range of VLAN IDs or a combination. For example:
Comma-separated: 3, 4, 6
Range: 5-10
Combination: 3, 4, 5-10, 8
Command Modes VLT DOMAIN PROXY GW STATIC
Command
History
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.
Usage
Information
You can configure the MAC address, of a VLT peer in remote VLT Domain, to be associated with the
static VLT proxy gateway and exclude a VLAN or a range of VLANs from proxy routing..
Example
Dell(conf)#vlt-domain 1
Dell(conf-vlt-domain#proxy-gateway static
Dell(conf-vlt-domain-proxy-gw-static)#remote-mac-address
00:01:e8:06:95:ac exclude-vlan 3
1296 VLT Proxy Gateway