Administrator Guide

Version Description
7.5.1.0 Introduced on the C-Series.
Example
Dell#show snmp engineID
Local SNMP engineID: 0000178B02000001E80214A8
Remote Engine ID IP-addr Port
80001F88043132333435 172.31.1.3 5009
80001F88043938373635 172.31.1.3 5008
Dell#
Related
Commands
snmp-server engineID — configures local and remote SNMP engines on the router.
show snmp group
Display the group name, security model, status, and storage type of each group.
Syntax
show snmp group
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series legacy
command
Usage
Information
The following Example displays a group named ngroup. The ngroup has a security model of version 3 (v3)
with authentication (auth), the read and notify name is nview with no write view name specified, and
finally the row status is active.
Example
Dell#show snmp group
groupname: v1v2creadg security model: v1
readview : v1v2cdefault writeview: no write view specified
notifyview: v1v2cdefault context: no context specified
row status: active
Dell#
Related
Commands
snmp-server group — configures an SNMP server group.
Simple Network Management Protocol (SNMP) and Syslog 1179