Administrator Guide

Example
Dell#show inventory media
Slot Port Type Media Serial Number F10Qualified
------------------------------------------------------------------------------
0 0 QSFP 40GBASE-CR4-1M APF11200012UQQ Yes
0 1 QSFP 40GBASE-CR4-1M APF11200012UQQ Yes
0 2 QSFP 40GBASE-CR4-1M APF11200012UQQ Yes
0 3 QSFP 40GBASE-CR4-1M APF11200012UQQ Yes
0 4 QSFP 40GBASE-CR4-1M APF11200012UR1 Yes
0 5 QSFP 40GBASE-CR4-1M APF11200012UR1 Yes
0 6 QSFP 40GBASE-CR4-1M APF11200012UR1 Yes
0 7 QSFP 40GBASE-CR4-1M APF11200012UR1 Yes
0 8 QSFP 40GBASE-CR4-1M APF12300017GEY Yes
0 9 QSFP 40GBASE-CR4-1M APF12300017GEY Yes
0 10 QSFP 40GBASE-CR4-1M APF12300017GEY Yes
Related
Commands
● show interfaces — displays the interface configuration.
● show interfaces transceiver — displays the physical status and operational status of an installed transceiver. The output also displays the transceiver’s serial
number.
show processes ipc flow-control
Display the single window protocol queue (SWPQ) statistics.
Syntax
show processes ipc flow-control [cp]
Parameters
cp (OPTIONAL) Enter the keyword cp to view the control processor’s SWPQ
statistics.
Defaults none
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series and E-Series.
Usage
Information
Field Description
Source QID /Tx
Process
Source Service Identifier
Destination
QID/Rx Process
Destination Service Identifier
Cur Len Current number of messages enqueued
114 Control and Monitoring