Administrator Guide

ManualsBrandsDell ManualsAccess PlatformsOS9

1011

Table Of Contents

match mac dot1p

Configure a match criterion for a class map based on a dot1p value.

Z9000

Syntax

match mac dot1p {dot1p-list}

Parameters

dot1p-list Enter a dot1p value. The range is from 0 to 7.

Defaults none

Command Modes CLASS-MAP

Command

History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

Usage

Information

To access this command, enter the class-map command. After the class map is identified, you can

configure the match criteria.

Commands

class-map — identifies the class map.

match mac vlan

Configure a match criterion for a class map based on VLAN ID.