Administrator Guide

match ip access-group — configures the match criteria based on the access control list (ACL).
match ip precedence — identifies the IP precedence values as match criteria.
match ip dscp — configures the match criteria based on the DSCP value.
match mac access-group — configures a match criterion for a class map based on the contents of the
designated MAC ACL.
match mac dot1p — configures a match criterion for a class map based on a dot1p value.
match mac vlan — configures a match criterion for a class map based on VLAN ID.
service-queue — assigns a class map and QoS policy to different queues.
show qos class-map — views the current class map information.
clear qos statistics
Clear qos statistics clears statistics from show qos statistics.
Z9000
Syntax
clear qos statistics interface-name
Parameters
interface-name Enter one of the following keywords:
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port information.
Defaults none
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.18.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Related
Commands
show qos statistics — displays the QoS statistics.
description
Add a description to the selected policy map or QoS policy.
Z9000
Syntax
description {description}
1006 Quality of Service (QoS)