Users Guide

ManualsBrandsDell ManualsAccess PlatformsOS9

831

832

833

834

835

836

837

838

839

840

Version Description

9.5(0.1) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.12.0 Introduced on the S4810.

8.3.11.1 Introduced on the Z9000.

8.3.1.0 Introduced on the E-Series.

Commands

● graceful-restart t3 — configure the overall wait time before graceful restart completes.

graceful-restart t1

Set the graceful restart wait time before unacknowledged restart requests are generated. This wait time is the interval before

the system sends a restart request (an IIH with RR bit set in Restart TLV) until the CSNP is received from the helping router.

Syntax

graceful-restart t1 {interval seconds | retry-times value}

To return to the default, use the no graceful-restart t1 command.

Parameters

interval Enter the keyword interval to set the wait time. The range is from 5 to 120

seconds. The default is 5 seconds.

retry-times Enter the keywords retry-times to set the number of times the request interval

is extended until a CSNP is received from the helping router. The range is from 1 to

10 attempts. The default is 1.

Defaults See Parameters.

Command Modes ROUTER ISIS

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

EMC Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.10(0.0) Introduced on the S6100–ON.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.