Users Guide

Example (Manual
Profiles)
DellEMC# show cam-acl
-- Chassis Cam ACL --
Current Settings(in block sizes)
L2Acl : 2
Ipv4Acl : 2
Ipv6Acl : 4
Ipv4Qos : 2
L2Qos : 3
-- Line card 4 --
Current Settings(in block sizes)
L2Acl : 2
Ipv4Acl : 2
Ipv6Acl : 4
Ipv4Qos : 2
L2Qos : 3
DellEMC#
Related
Commands
● cam-acl — configure CAM profiles to support IPv6 ACLs.
show ipv6 accounting access-list
View the IPv6 access-lists created on the E-Series and the sequence of filters.
Syntax
show ipv6 accounting access-list [access-list-name [cam_count | interface
interface {in | out}]
Parameters
access-list-name Enter the name of the ACL to be displayed, up to 140 characters.
cam_count List the count of the CAM rules for this ACL.
interface
interface
Enter the keyword interface followed by the interface type and slot/port or
number information:
● For a Port Channel interface, enter the keywords port-channel followed by
a number. For the C-Series and S-Series, the range is 1 to 128. For the E-Series,
the range is 1 to 255 for TeraScale and 1 to 512 for ExaScale.
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port/subport information.
● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed
by the slot/port information.
● For a 25-Gigabit interface, enter the keyword twentyfiveGigE then the
slot/port/subport information.
● For a 50-Gigabit interface, enter the keyword fiftyGigE then the slot/port/
subport information.
● For a 100-Gigabit interface, enter the keyword hundredGigE then the slot/
port information.
in | out Identify whether ACL is applied on ingress or egress side.
Command Modes
● EXEC
● EXEC Privilege
Command
History
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
IPv6 Access Control Lists (IPv6 ACLs) 803