Users Guide

show default-gateway
Display the IP address configured for the default gateway.
Syntax show default-gateway
Command Modes BOOT_USER
Command
History
Version Description
9.10(0.0) Introduced on the S6100.
9.8(1.0) Introduced on the Z9100–ON.
9.0.2.0 Introduced on the S6000.
Example
BOOT_USER # show default-gateway
Gateway IP address: 10.16.100.254
BOOT_USER #
Related
Commands
default-gateway— Configure the IP address for the default gateway.
interface_management_ethernet_ip_address — Assign an IP address to the Management Ethernet
interface.
show interface management ethernet
Display the IP address configured for the Management interface.
Syntax
show interface management ethernet
Command Modes BOOT_USER
Command
History
Version Description
9.10(0.0) Introduced on the S6100.
9.8(1.0) Introduced on the Z9100–ON.
9.0.2.0 Introduced on the S6000.
Example
BOOT_USER # show interfaces management ethernet
Management ethernet IP address: 10.16.133.17/24
BOOT_ADMIN #
On the S6000, the output of this command includes the MAC address and port number of the assigned
management port.
Example
BOOT_ADMIN # show int man eth
Management ethernet IP address: 10.16.132.4/16
BOOT_ADMIN #
Related
Commands
interface_management_ethernet_ip_address — Assign an IP address to the Management Ethernet
interface.
reload — Configure speed, duplex, and negotiation settings for the management interface.
Boot Command Line Interface 335