Users Guide

Access Control Lists (ACL)
Access control lists (ACLs) are supported by the Dell EMC Networking OS.
Dell EMC Networking OS supports the following types of ACL, IP prefix list, and route maps:
● Commands Common to all ACL Types
● Common IP ACL Commands
● Standard IP ACL Commands
● Extended IP ACL Commands
● Common MAC Access List Commands
● Standard MAC ACL Commands
● Extended MAC ACL Commands
● IP Prefix List Commands
● Route Map Commands
● AS-Path Commands
● IP Community List Commands
NOTE: For ACL commands that use the Trace function, see Trace List Commands section in Security.
NOTE: For IPv6 ACL commands, see IPv6 Access Control Lists (IPv6 ACLs).
Topics:
• Commands Common to all ACL Types
• Common IP ACL Commands
• Standard IP ACL Commands
• Extended IP ACL Commands
• Common MAC Access List Commands
• Standard MAC ACL Commands
• Extended MAC ACL Commands
• IP Prefix List Commands
• Route Map Commands
• deny (for Standard IP ACLs)
• deny (for Extended IP ACLs)
• seq (for Standard IPv4 ACLs)
• deny tcp (for Extended IP ACLs)
• deny (for Standard MAC ACLs)
• deny (for Extended MAC ACLs)
• permit (for Standard IP ACLs)
• permit icmp (for Extended IP ACLs)
• permit udp (for Extended IP ACLs)
• permit (for Extended IP ACLs)
• permit (for Standard MAC ACLs)
• seq (for Standard MAC ACLs)
• permit tcp (for Extended IP ACLs)
• seq (for IP ACLs)
• seq (for IPv6 ACLs)
• permit udp (for IPv6 ACLs)
• permit tcp (for IPv6 ACLs)
• permit icmp (for IPv6 ACLs)
• permit (for IPv6 ACLs)
• deny udp (for IPv6 ACLs)
• deny tcp (for IPv6 ACLs)
6
Access Control Lists (ACL) 183