Users Guide

ManualsBrandsDell ManualsAccess PlatformsOS9

1701

show vrrp

View the VRRP groups that are active. If no VRRP groups are active, the Dell EMC Networking OS returns No Active VRRP

group.

Syntax

show vrrp [vrrp-id][brief][interface type][ipv6][interface type][vrf vrf-

name]

Parameters

vrrp-id

(OPTIONAL) Enter the virtual router identifier for the VRRP group to view only

that group. The range is from 1 to 255.

brief (OPTIONAL) Enter the keyword brief to view a table of information about the

VRRP groups.

interface type

(OPTIONAL) Enter the following keywords and the interface information:

● For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port/subport information.

● For a 25-Gigabit Ethernet interface, enter the keyword twentyFiveGigE

then the slot/port/subport information.

● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the

slot/port/subport information.

● For a 50-Gigabit Ethernet interface, enter the keyword fiftyGigE then the

slot/port/subport information.

● For a 100-Gigabit Ethernet interface, enter the keyword hundredGigE then

the slot/port information.

● For a VLAN interface, enter the keyword vlan, and then the VLAN ID. The

VLAN ID range is from 1 to 4094.

ipv6 (OPTIONAL) Enter the keyword ipv6 to view only VRRP IPv6 groups.

vrf

vrf-name

(OPTIONAL) Enter the keyword vrf and then the name of the VRF to view active

VRRP groups corresponding to that VRF.

Command Modes

● EXEC

● EXEC Privilege

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

EMC Networking OS Command Line Reference Guide.

Version Description

9.10(0.1) Introduced on the S6010-ON and S4048T-ON.

9.10(0.0) Introduced on the S3148.

9.10(0.0) Introduced on the S6100–ON.

9.8(2.0) Introduced on the S3100 series.

9.8(1.0) Introduced on the Z9100–ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.4.(0.0) Added support for VRF.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

Virtual Router Redundancy Protocol (VRRP) 1701