Users Guide

5 changes, last change 00:02:30
Metric threshold down 255 up 254
First-hop interface is TenGigabitEthernet 1/2/1
Tracked by:
VRRP TenGigabitEthernet 2/4/1 IPv6 VRID 1
Track 3
IPv6 route 2050::/64 reachability
Reachability is Up (STATIC)
5 changes, last change 00:02:30
First-hop interface is TenGigabitEthernet 1/2/1
Tracked by:
VRRP TenGigabitEthernet 2/4/1 IPv6 VRID 1
Usage Command The following describes the show track ipv6 route brief command shown in the Example below.
Ouput Description
ResID Number of the tracked object.
Resource Type of tracked object.
Parameter Detailed description of the tracked object.
State Up or Down state of the tracked object.
Last Change Time since the last change in the state of the tracked object.
Example (Brief)
DellEMC# show track ipv6 route brief
ResId Resource Parameter State LastChange
2 IPv6 route metric threshold 2040::/64 Up 00:02:36
3 IPv6 route reachability 2050::/64 Up 00:02:36
Related
Commands
● show running-config track – display configuration information about tracked objects.
● show track – display information about tracked objects, including configuration, current state, and
clients which track the object.
● track interface ipv6 routing – configure object tracking on the routing status of an IPv6 Layer 3
interface.
● track ipv6 route metric threshold – configure object tracking on the threshold of an IPv6 route metric.
● track ipv6 route reachability – configure object tracking on the reachability of an IPv6 route.
track interface ipv6 routing
Configure object tracking on the routing status of an IPv6 Layer 3 interface.
Syntax
track object-id interface interface ipv6 routing
To return to the default setting, use the no track object-id command.
Parameters
object-id Enter the ID number of the tracked object. The range is 1 to 500.
interface Enter one of the following values:
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port/subport information.
● For a 25-Gigabit Ethernet interface, enter the keyword twentyFiveGigE
then the slot/port/subport information.
● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port/subport information.
● For a 50-Gigabit Ethernet interface, enter the keyword fiftyGigE then the
slot/port/subport information.
● For a 100-Gigabit Ethernet interface, enter the keyword hundredGigE then
the slot/port information.
Object Tracking 1039