Setup Guide

Te 3/5 Disabled No
Te 3/6 Disabled No
Te 3/7 Disabled No
Te 3/8 Disabled No
DellEMC# show gvrp brief
Related
Commands
● show gvrp statistics — display the GVRP statistics.
show gvrp statistics
Display the GVRP configuration statistics.
S6000
Syntax
show gvrp statistics {interface interface | summary}
Parameters
interface
interface
(OPTIONAL) Enter the keyword interface then one of the interface keywords
and the interface information:
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port information.
summary Enter the keyword summary to display just a summary of the GVRP statistics.
Defaults None
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.11.1 Introduced on the Z9000.
7.6.1.0 Introduced on C-Series, E-Series, and S-Series
Usage
Information
Invalid messages/attributes skipped can occur in the following cases:
● The incoming GVRP PDU has an incorrect length.
● "End of PDU" was reached before the complete attribute could be parsed.
● The Attribute Type of the attribute that was being parsed was not the GVRP VID Attribute Type
(0x01).
GARP VLAN Registration (GVRP) 627