Setup Guide

burst-KB (OPTIONAL) Enter the burst size in KB. The range is from 0 to 10000. The default
is 50.
Defaults Granularity for rate is Mbps unless you use the kbps option.
Command Modes INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100-ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Added the kbps option on the C-Series, E-Series, and S-Series.
7.6.1.0 Introduced on the S-Series and C-Series.
6.1.1.1 Introduced on the E-Series.
Usage
Information
If traffic is shaped between 64 and 1000 Kbs, for some values, the shaped rate is much less than the
value configured.
On 40-port 10G stack-unit if the traffic is shaped between 64 and 1000 Kbs, for some values, the shaped
rate is much less than the value configured.
NOTE: When packets of size greater than 7000 bytes are expected to be received from the network,
Dell EMC Networking recommends that you configure the burst value to be more than 175 KB if you
configured the rate shape. Such a setting ensures proper bandwidth sharing across queues.
Related
Commands
● rate-shape — shapes traffic output as part of the designated policy.
service-class dynamic dot1p
Honor all 802.1p markings on incoming switched traffic on an interface (from INTERFACE mode) or on all interfaces (from
CONFIGURATION mode). A CONFIGURATION mode entry supersedes an INTERFACE mode entry.
S6000
Syntax
service-class dynamic dot1p
To return to the default setting, use the no service-class dynamic dot1p command.
1206 Quality of Service (QoS)