Release Notes
Table Of Contents
- Dell EMC System S3048–ON 9.14(2.10) Release Notes
- Document Revision History
- Supported Hardware
- Supported Software
- New Dell EMC Networking OS Version 9.14(2.10) Features
- Restrictions
- Changes to Default Behavior and CLI Syntax
- Documentation Corrections
- Deferred Issues
- Fixed Issues
- Known Issues
- Upgrading the sub-components
- Upgrading ONIE on the S3048-ON
- Installing Dell EMC Networking OS on the S3048-ON using ONIE
- Upgrading the S3048-ON Dell EMC Networking OS Image using the Dell EMC Networking OS CLI
- Uninstalling Dell EMC Networking OS on the S3048-ON
- Installing a Third Party Operating System
- Support Resources
Boot Flash : 3.24.2.9
Boot Selector : 3.24.0.0-11
Memory Size : 2127654912 bytes
Temperature : 30C
Voltage : ok
Serial Number : NA
Part Number : 0VCY6T Rev A00
Vendor Id : NA
Date Code : NA
Country Code : NA
Piece Part ID : CN-123456-DELLI-215-8989
PPID Revision : A00
Service Tag : NA
Expr Svc Code : NA
Auto Reboot : enabled
Burned In MAC : 00:e0:ec:25:d9:50
No Of MACs : 3
-- Power Supplies --
Unit Bay Status Type FanStatus FanSpeed(rpm)
-----------------------------------------------------
1 1 up AC up 8032
1 2 up AC up 8096
-- Fan Status --
Unit Bay TrayStatus Fan1 Speed
--------------------------------------
1 1 up up 7200
1 2 up up 7200
1 3 up up 7200
Speed in RPM
DellEMC#
Upgrade the GRUB or Boot Flash
To upgrade the GRUB or Boot Flash from Dell EMC Networking OS, perform the following steps:
1. Upgrade the S3048-ON Boot Flash image.
EXEC Privilege
upgrade boot bootflash-image stack-unit [<id> | all] [booted | flash: | ftp: | scp: |
tftp: | usbflash:]
DellEMC#upgrade boot bootflash-image stack-unit 1 booted
Current Boot information in the system:
=====================================================================
Card BootFlash Current Version New Version
---------------------------------------------------------------------
Unit1 Boot Flash 3.24.2.3 3.24.2.9
***********************************************************************
* Warning - Upgrading boot flash is inherently risky and should only *
* be attempted when necessary. A failure at this upgrade may cause *
* a board RMA. Proceed with caution ! *
***********************************************************************
Proceed upgrade Boot Flash image for stack-unit 1 [yes/no]: yes
!!!!!
Bootflash image upgrade for stack-unit 1 completed successfully.
8