Release Notes

Restarting system.
machine restart
BIOS (Dell EMC) Boot Selector
S3000 3.24.0.0-11
(48-port 1G/4-port SFP+ 10G)
CPLD JTAG to normal mode... done.
Resetting...
POST Configuration
CPU Signature 406D8
CPU FamilyID=6, Model=4D, SteppingId=8, Processor=0
Microcode Revision 125
Platform ID: 0x1004183D
PMG_CST_CFG_CTL: 0x40006
BBL_CR_CTL3: 0x7E2801FF
Misc EN: 0x4000840081
Gen PM Con1: 0x1008
Therm Status: 0x88490000
POST Control=0xEA010303, Status=0xE6009601
BIOS initializations...
CPLD JTAG to normal mode... done.
BIOS initializations...
CPGC Memtest for Channel 0 .................. PASS
ECC enabled: channel 0 MayCCTRL_DUNIT_REG=0x000200F3
POST:
RTC Battery OK at last cold boot
RTC date Tuesday 05/18/2021 22:35:26
POST SPD test ..................................... PASS
POST Lower DRAM Memory test
Short memory cell test
Perf cnt (curr,fixed): 0x21157AA35,0x31A008980
POST Lower DRAM Memory test ................. PASS
POST Lower DRAM ECC check ................... PASS
Dell DxE configurations...
Broadcom Preemphasis...
Gen1=0x4, Gen2=0x43
done.
NPU CDR... .. done.
SM Bus1 PHY...done
DxE POST
POST PCI test ............................... PASS
POST NVRAM check ............................ PASS
POST overall test results ......................... PASS
Version 2.16.1242. Copyright (C) 2021 American Megatrends, Inc.
BIOS Date: 05/18/2021 01:14:04 Ver: 0ACBZ018
Press DEL or F2 to enter setup.
Grub 1.99~rc1 (Dell EMC)
Built by root at ubuntu on Tue_May_18_14:42:47_UTC_2021
S3000ON Boot Flash Label 3.24.2.9 NetBoot Label 3.24.2.9
13