Install Guide

Table 117. MIB Objects for LAG (continued)
MIB Object OID Description
dot3adAggCollectorMaxDelay 1.2.840.10006.300.43.1.1.1.1.10 Contains a 16–bit read–write attribute
defining the maximum delay, in tens of
microseconds, that may be imposed by
the frame collector between receiving a
frame from an Aggregator Parser, and
either delivering the frame to its MAC
Client or discarding the frame.
dot3adAggPortListTable 1.2.840.10006.300.43.1.1.2 Contains a list of all the ports associated
with each Aggregator. Each LACP
channel in a device occupies an entry in
the table.
dot3adAggPortListEntry 1.2.840.10006.300.43.1.1.2.1 Contains a list of ports associated with
a given Aggregator and indexed by the
ifIndex of the Aggregator.
dot3adAggPortListPorts 1.2.840.10006.300.43.1.1.2.1.1 Contains a complete set of
ports currently associated with the
Aggregator.
Viewing the LAG MIB
● To view the LAG MIB generated by the system, use the following command.
snmpbulkget -v 2c -c LagMIB 10.16.148.157 1.2.840.10006.300.43.1.1.1.1.1
iso.2.840.10006.300.43.1.1.1.1.1.1258356224 = Hex-STRING: 00 01 E8 8A E8 46
iso.2.840.10006.300.43.1.1.1.1.1.1258356736 = Hex-STRING: 00 01 E8 8A E8 46
iso.2.840.10006.300.43.1.1.1.1.2.1258356224 = INTEGER: 32768
iso.2.840.10006.300.43.1.1.1.1.2.1258356736 = INTEGER: 32768
iso.2.840.10006.300.43.1.1.1.1.3.1258356224 = Hex-STRING: 00 01 E8 8A E8 44
iso.2.840.10006.300.43.1.1.1.1.3.1258356736 = Hex-STRING: 00 01 E8 8A E8 44
iso.2.840.10006.300.43.1.1.1.1.4.1258356224 = INTEGER: 1
iso.2.840.10006.300.43.1.1.1.1.4.1258356736 = INTEGER: 1
iso.2.840.10006.300.43.1.1.1.1.5.1258356224 = INTEGER: 127
iso.2.840.10006.300.43.1.1.1.1.5.1258356736 = INTEGER: 128
MIB Support for CAM
Dell EMC Networking provides a method to retrieve the CAM usage information. The following table lists the related MIB
objects:
Table 118. MIB Objects for CAM
MIB Object OID Description
camUsageL2Pi
peLine
1.3.6.1.4.1.6027.3.7.1.1.2.1.11 Contains information about the pipe line number of
the chip on the layer 2 switch where CAM is located.
camUsageL3Pi
peLine
1.3.6.1.4.1.6027.3.7.1.1.3.1.19 Contains information about the pipe line number of
the chip on the layer 3 switch where CAM is located.
camUsageL3In
gQosUsed
1.3.6.1.4.1.6027.3.7.1.1.3.1.12.stack-unit.port-pipe.pipe-
line
Contains information about the total CAM size
allocated to layer 3 ingress QOS.
camUsageL3In
gAclUsed
1.3.6.1.4.1.6027.3.7.1.1.3.1.16.stack-unit.port-pipe.pipe-
line
Contains information about the total CAM size
allocated to layer 3 ingress ACL.
camUsageL3E
grAclUsed
1.3.6.1.4.1.6027.3.7.1.1.3.1.18.stack-unit.port-pipe.pipe-
line
Contains information about the total CAM size
allocated to layer 3 egress ACL.
832 Simple Network Management Protocol (SNMP)